Polystyvert announced the construction of the first large-scale commercial plant in the Greater Montreal area of Canada to produce recycled styrofoam. The company is investing approximately $40 million in support of the project, which will recycle 9,000 tons of highly polluting post-consumer and post-industrial styrofoam waste per year. This amount is equivalent to 15% of the styrofoam landfilled in Quebec every year. While it doesn't quite save all styrofoam from landfills, it's a very good start. In fact, there is no real waste, only misplaced resources, such as Polystyvert. move should be strongly supported

During the recycling process, GREENMAX recommends first removing the stickers on the surface of the styrofoam waste, especially the adhesive tape. This kind of attachment attached to the styrofoam that affects the recovery effect will not only affect the recycling effect, but even damage the machine, causing artificial damage to the machine. So before recycling, we need to pay attention to whether there are tapes for fixing on these wastes and stickers with the manufacturer's logo. Everything is ready for better use of styrofoam compactor. Styrofoam compactor can also be called styrofoam screw compactor, because the main compression part is the screw, which uses physical extrusion to discharge the air. The whole process is very energy-saving and environmentally friendly. The compression ratio of styrofoam can also reach 50:1.

“We are very proud to see Polystyvert achieve this goal. After several successful development phases, the technology has matured. The plant is the first of many around the world, doubling down on the project by replicating what has been done in the greater Montreal area economic and environmental benefits. Polystyvert President Nathalie Morin said. The use of styrofoam screw compactor can well assist in realizing the vision of economic benefits. The reduced styrofoam is more convenient for transportation and management, reduces additional costs, and better realizes the economic cycle. The compressed styrofoam can be used as a recycled material, which can be combined with new materials and put into new production. Adding it according to a certain proportion can achieve good recycling. This is also one of the main means for increasing economic benefits in the recycling field.