On April 2, Theriault gave a demonstration of the equipment that turns large sacks of foam into neat blocks that are supplied to plastics businesses for use in the production of molding, insulation, and other products. 

The initiative will cost $108,000 in total. Last summer, the Foam Recycling Coalition awarded the Town of Gilford a $50,000 grant to help with the purchase of a machine. The cost of the device is roughly $80,000. About $5,500 was needed to run an electrical connection to the unit; the remaining money was used to buy two long storage containers for loose foam, four collecting bins, and reusable bags. 
Recycling with foam recycling machine is a correct and mainstream choice, especially now in the field of recycling equipment, there are more and more types to choose from. In GREENMAX's equipment factory, you can see four foam compactors. You can choose according to your own actual situation. GREENMAX recommends focusing on material volume density, material source and other practical conditions.

GREENMAX Foam compactor Apolo series
This foam compactor is mainly used to recycle EPS foam and XPS foam. GREENMAX Foam compactor Apolo completely adopts cold pressing technology and achieves 50:1 compression through crushing and screw extrusion.

GREENMAX Foam compactor Zeus series

This foam compactor is mainly used to recycle EPS foam, XPS foam, EPE foam and EPP foam, because this equipment places a hot melt ring at the outlet of the most basic foam compactor, which can effectively compact EPE. ,EPP and other foam.

GREENMAX Foam compactor Marine series

The main sales area of this foam compactor is actually Europe, because a large part of the source of European foam packaging is fishery. It is precisely because this kind of packaging has a higher water content and salt content that the machine is more susceptible to corrosion and Injury, this marine series machine is made of stainless steel to avoid this risk.

GREENMAX Foam hydraulic compactor Heracles series
In addition to conventional EPS foam, this foam compactor mainly adds the recycling of PUR foam and PIR foam. At the same time, the compression ratio is greater than the above three devices, which can reach 70:1. The compression principle is also different. The above three models adopt Instead of screw extrusion, Foam hydraulic compactor uses hydraulic technology.

After learning about so many types of foam compactors, you should be full of confidence in the recycling of foam plastic. However, this is only part of the recycling equipment designed and manufactured by GREENMAX. If you are interested in this, please feel free to contact GREENMAX!